1 sim cards, Basic, Free minutes/sms – 2N NetStar Admin manual User Manual
Page 79

79
4.1 SIM Cards
The
menu includes a list of all PBX SIM cards. This menu
Virtual ports – GSM – SIM
is opened automatically whenever the SIM card is inserted in the PBX and the
parameters filled in by the user (e.g. PIN) are used automatically for any future system
detection of the SIM card. The menu includes two tags.
Basic
Card serial number – this parameter shows the SIM card identification code
detected. The NetStarAdmin uses this code automatically for SIM cards
identification in the list on the left–hand side of the menu.
PIN – Personal Identification Number – here insert the SIM card PIN if requested
to be shared by the user and the authentication system. If the PIN is requested
yet not entered or entered incorrectly, the SIM will not be logged into the
network.
PUK – Personal Unblocking Key – here insert the PUK to unblock the SIM card in
case you have entered three incorrect values of the PIN code.
SMS centre number – fill in this parameter to enable SMS sending. In GSM
networks, SMSs are not routed directly to the final destination, but through the
provider's SMS centre. This is useful where an SMS cannot be delivered
immediately (e.g. due to target phone unavailability). The SMS centre tries to
deliver this message cyclically for a preset SMS validity time. This parameter is
mostly automatically detected on the SIM card (preset by the provider). If not,
fill it in manually.
Phone number – this field has an informative character only. You can enter
your SIM card telephone number for easier orientation. This parameter has no
function.
Name – this field has an informative character only. It helps distinguish multiple
SIM cards.
Port – this field has an informative character only. It shows the physical port
where the SIM card is being detected at the moment.
Free minutes/SMS
Use the tag to set the count of free minutes and SMS mesages via the selected SIM
card. Refer to the
menu in the Free minutes/SMS section for
Virtual Port Options
details on controls and tables.