2N NetStar Admin manual - Manual (Page 210)

210
Forwarding
CFNA – Call Forwarding at No Answer – use this parameter to set forwarding to
VoiceMail in case the incoming call is not answered within the preset period the
time. To specify the time limit, use the Forwarding subtag in the Properties tag
for the respective user. The default value is 30 seconds.
CFU – Call Forwarding Unconditional – here set the unconditional forwarding to
VoiceMail. It means that all incoming calls will be forwarded directly to the
VoiceMail if this profile is active (unless there is a hierarchical exception).
CFEC – Call Forwarding on Error Cause – here set the forwarding to VoiceMail in
the case of busy user or another error cause detection (e.g. call rejection).
Welcome note
Welcome note – use this option to choose a VoiceMail progress tone from a list.
Set welcome note – use this option to enable/disable recording of a VoiceMail
progress tone via the VoiceMail Record welcome note (*35) service.
Messages
Maximum record length [s] – use this parameter to set the maximum voice
message recording time. After this time limit, the incoming call will be cleared
automatically.
Do not store – use this option to enable/disable saving of VoiceMail to the PBX.
Voice messages are only resent to the corresponding e–mail (according to the
setting).
Maximum record term [s] – use this parameter to set the maximum voice
message storing time in the PBX. After this time limit, the voice message will be
removed the moment another message is saved.
Delete oldest at no space – use this option to remove the oldest voice
messages in order to get more space for new voice messages.
Maximum record count – use this parameter to set the maximum count of
voice messages to be stored in the PBX.