2N NetStar Admin manual - Manual (Page 34)

34
2.4 Board and Port List
The menu contains a list of boards that are physically present Hardware – Board list
in the PBX. The board list has four columns with the following meanings:
Address – shows the physical board address within the PBX according to the
chapter. Boards
Type – shows the board type.
Serial number – shows the factory-programmed board serial number.
MAC address – shows the board MAC address.
Module IMEI – shows IMEI of GSM module.
Virtual port – shows the complete name of the carrier or resource assigned to a
physical port.
Stack – shows the general carrier / protocol stack (DSS1, ASL, CO, etc.).
Extension – shows the list of extensions assigned to a physical port carrier.
User – shows the users of extensions assigned to a physical port.
State – shows the current port state.
Description – provides associated information.
The context menu under the right button offers the following two options:
Export to CSV – use this option to export the whole table into a *.CSV file. You
can use this export for stocktaking purposes and/or for contacting the 2N
®
Technical Support if necessary. TELEKOMUNIKACE
Move to port – use this option to move quickly to the configuration of the virtual
port on the selected row.