2N NetStar Admin manual - Manual (Page 207)

207
Basic
Name – shows only the name of the selected user profile. It has an informative
character only and cannot be changed here. To change it, use the Rename
option in the context menu as described above.
Number – represents a profile identifier used primarily for
. If Profile activation
you do not fill in this field, you will not be able to use this service.
Bundle – use this option to assign a selected profile to one of the available PBX
bundles. Upon activation of a profile to which a bundle has been assigned, the
user is automatically added to this bundle. Upon deactivation, the user is
automatically removed from this bundle.
Presence string – here type the text to be displayed to the user calling to one
of your extensions. This setting has a higher priority than the same setting on
the no–profile user level. It means that if this profile is active, this text will be
displayed independently of other settings.
Status – here select one of the pre–defined statuses to be used for user status
identification by co–operating applications if the given profile is active. The
pre–defined statuses correspond to the standard statuses applied in instant
messaging applications.
VoiceMail
This tag is similar to the VoiceMail tag on the user level. However, this tag does not
support all parameters. It is only used for more precise settings of the user profile. The
parameters of this tag have a higher priority. You can set the following:
Content
Progress – here set the progress tone to be played to the calling user in the
case of call forwarding to VoiceMail.
CFNA (Forwarding at no answer) – here set the forwarding to VoiceMail in
case the incoming call is not answered before the timeout end. To specify the
timeout, use the
subtag in the tag for the respective Forwarding Properties
user. The default value is 30 seconds.
CFU (Forwarding unconditional) – here set the unconditional forwarding to
VoiceMail. It means that all incoming calls will be forwarded directly to the
VoiceMail if this profile is active (unless there is a hierarchical exception).
CFEC (Forwarding on error cause or busy) – here set the forwarding to
VoiceMail in the case of busy user or another error cause detection (e.g. call
rejection).
Properties
The tag consists of a lot of subtags, which are described in a separate Properties
chapter for convenience. This tag is exceptional because almost all of its parameters
follow the hierarchical structure. For the structure and all the parameters refer to
Chapter
. Setting Properties
Profiles & Time Conditions
In the Profiles & Time conditions tag assign time conditions to the user profiles created
using the
. The context menu of this tag has Users – Users and Groups – Profiles
two options only: