2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 91)

Routing objects 7.2
91
sent and button Enable isn't activ. If sending is stopped, messages aren't sent and button Enable is
ready for use.
State detector – active – With this option you can enable message about active state of detector.
Within this section you can define text of sent message. Optionally you can also stop another sending
after this message via checkbox Stop sending when message was sent.
State detector – inactive – With this option you can enable message about deactive state of
detector. Within this section you can also define text of sent message. Optionally you can also stop
another sending after this message via checkbox Stop sending when message was sent.
Detector unavailable – With this option you can enable message about unavailable detector. Within
this section you can also define text of sent message. Optionally you can also stop another sending
after this message via checkbox Stop sending when message was sent.
Detector ready – With this option you can enable message about ready detector. Within this section
you can also define text of sent message. Optionally you can also stop another sending after this
message via checkbox Stop sending when message was sent.
7.2.9 CallBack
What is it Callback?
Callback is function used for external stations of your PbX. With callback you can easily reduce costs
of external stations. Station with enabled function callback only alerts PbX or send SMS in
corresponding form and PbX calls back to this station. After acceptance of the call can external
station dial through the PbX according to the configuration in the same way as in case of direct call.
So you don't need to have expensive fixed payment tariff for all external stations, but only for SIM
cards in your PbX.
Callback configuration
Configuration menu for callback you can find in part Routing – Routing objects . Menu is divided
into two parts. Left side is used for management and right side is used for setting up selected object.
Context menu from the left side of the menu consist of following options:
Add – With this option you can add new object Callback.
Delete – With this option you can delete selected object.
Rename – With this option you can rename selected object.
Default – With this option you can delete all actual objects of this menu and create default Callback
objects – one for calls and one for SMS messages.
Actualize – With this option you can add default Callback objects and preserve actual ones. If default
objects are already created, their parameters are set to default.
On the right side of the menu you can find following parameters:
Name – It only displays name of selected object.
Callback delay [s] – This parameter defines delay between Callback recognition and execution.
Ring detection timeout [s] – This parameter defines time of ringing for incoming call from station
with function Callback. If this timeout expires (calling user doesn't hang up), call is routed to
Destination after timeout as normal call and function Callback isn't used.
Destination for ring – This destination is used in the case of successful Callback immediately after
call acceptance on the external station.