2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 119)

Setting the properties tab 9.1
119
Keys volume – With this parameter you can set up loudness of the key hit in the handset or
handsfree. Parameter can be set within the range of 0 to 15.
Ring volume – With this parameter you can set up loudness of the ring tone. Parameter can be set
within the range of 0 to 8.
Handsfree volume – With this parameter you can set up loudness of the handsfree. Parameter can
be set within the range of 0 to 15.
Headset volume – With this parameter you can set up loudness of the handset. Parameter can be
set within the range of 0 to 15.
Display contrast – This parameter sets up display contrast. Parameter can be set within the range
of 0 to 7.
Time format – This parameter sets up time format. You can choose between time format with
twentyfour hours and time format with twelve hours.
Call list type – With this option you can set up displaying of call records in one of the following
formats: Name and time, Number and time, Name list or Number list.
Call list type – With this option you can set up displaying of call list in one of the following formats:
Name and time, Number and time, Name list or Number list.
Phone list type – With this option you can set up displaying of phone book in one of the following
formats: Name list or Name and number.
Message list type – With this option you can set up displaying of received messages in one of the
following formats: Name and time, Number and time, Name list or Number list.
Default melody – This option sets up ring melody for system phone StarPoint. System phone uses
predefined ring pattern, but this pattern is played with melody defined within this parameter. Default
melody is Cornet Elephant.
Message ring tone – This option defines ring tone for caution about received message.
Intercom ring tone – This option defines ring tone for caution about incoming intercom call.
Information type at relax state – With this option you can set up format of information, which is
displayed on the second line of the system phone at rest. You can choose between following options:
Name – It shows station name.
Number – It shows station number.
Profile – It shows active profile name.
Name and profile – It shows station and active profile name.
Number and profile – It shows station number and active profile name.
Name and number – It shows name and number of the station.
Information type at incoming call – With this option you can set up format of information, which
is displayed on the second line of the system phone at the time of incoming call. You can choose
between following options:
CLIP – It shows only calling party number (CLI).
CLIP and CPN – It shows calling party number (CLI) and originally called party number
(original CPN).
CLIP and CPN list – It shows calling party number (CLI) and originally called party number
(original CPN). In both cases are numbers compared with phone books. If corresponding record
is found, name is displayed except number.
Waiting for next key – With this option you can set up movement rate of the cursor from one
position to another. It is used on system phones StarPoint by writing a text. You can choose between