2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 80)

Routing objects 7.2
80
Figure 1 View of configuration menu of routing object Ring group – tab Basic.
Advanced settings
Force CLIP – It is used as quick identification tab for incoming way differentiation. Calling party
identification is changed after passing this object. You have to set up Scheme (Number or URI),
Subtype (Unknown, Internal, Local, National, International) and Number/URI (specific number or
address). In call history at the called user is presented original identification of the calling user.
Force Facility – It refers to the called number. It is used within DSS1 messages during
communication with Ericsson exchanges for billing. You also have to set up Scheme (Number or
URI), Subtype (Unknown, Internal, Local, National, International) and Number/URI (specific
number or address).
Force Redirecting – It refers to the called number. It is used within DSS1 messages during
communication with Nokia exchanges for billing. You also have to set up Scheme (Number or URI),
Subtype (Unknown, Internal, Local, National, International) and Number/URI (specific number or
address).
Assistant – Within this section you can set up selected ring group in face of user application
Assistant.
Visible in Assistant – With this option you can display ring group within mentioned application. If it
isn't checked, specific ring group isn't displayed and you aren't able to use it within the application.
Group – With this option you can set group of users, who are able to work with selected ring group
within the application. Ring groups you can assign only to the so called root groups (never to the
subgroups). Assigned ring group is available for all users from the root group and also for all users
from subgroups which fall into selected root group.