2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 54)

Licences 6.3
54
Local settings
With checkbox Local calls possible you can open part of this menu, where you can setup national
parameters similarly as in the part International:
Number – This number presents national access code (area code). For example in Slovakia has city
Bratislava area code 2.
Prefixes – This prefix presents access codes for access to national telephone network.
Normalize CLIP
Normalize CLIP – Checked option sets up automatic cut of incoming calling party number (CPN) to
the shortest known format according to set localization. If this option isn't checked, you have to route
incoming calls via CPN routers to requested destination. This setting in effect means that numbers
+421XXX, 00421XXX, 0XXX and XXX are identical (only for routing).
Settings presented in this chapter are particulary done within the Initial Wizard by first
login to the system in online mode with new database.
6.3 Licences
Licence files
This part consists of list of installed licence files and of their basic description. Licence files you can
here instal or uninstal. Field consists of some columns with following meaning:
File – This parameter shows absolute path to specific licence file within the system data space.
State – Parameter shows actual state of specific licence file within the system (e.g. Loaded, Not
loaded, Bad CPU, ...).
E1 ports – Parameter shows the number of licensed ports for ISDN PRI.
E1 channels – Parameter shows the number of licensed channels for ISDN PRI.
SIP terminals – Parameter shows the number of licensed terminals for VoIP telephons. Without
these terminals you aren't able to sign on your VoIP station to the SIP proxy.
ME – Parameter shows the number of licensed external stations (ME – Mobility Extension). If you
want to enable parameter Transfer on the tab Properties – ME at one of the hierarchical levels,
you will need more licences. When you set this parameter to "Yes" at the user, then you will need as
many licences as he has stations. When you set this parameter to "Yes" at the carrier type, it will be
even more complicated. You have to count stations, which are assigned to the carriers of this carier
type. This number applies to count of required licences for parameter Transfer.
Figure 1 Example of Netstar with three valid licences.