2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 50)

Services Setting 5.2
50
Figure 4 View of the configuration menu on the tab Notification.
User/Community – Here you have to define concrete SNMP user, which corresponds to USM for
SNMP v3 and to community for other versions.
Filter – Here you have to define filter for notifications. Longer OID for root or subtrees means stricter
filter.
Security level – This parameter can be used only for SNMP v3 and it defines level of security for
notifications. You can choose between following:
Authentication and privacy
Without authentication and privacy
Authentication only
Context – With text string can be identified concrete SNMP module within client address. This
parameter doesn't need to be filled.
5.2.4 Message bridge
Menu Message bridge is used for management of ports, through which you are able to connect to
your PbX. Basically you can only add or remove port within this menu. For each port you can then
set if it requires authorization or not. After creating database is here only port 6992, which requires
authorization.