2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 65)

Time parameters 6.8
65
Figure 2 Part of the menu for time conditions editing.
Regarding to complexity of the time conditions are defined exact rules:
1) There are defined parameters which optionally defines absolute limits of time interval validity (it
means beginning and ending). If these limits are defined, time condition can be valid only within this
limits, regardless further settings (including Interval negation). On the top of dialogue box for time
interval setting are checkboxes From and To. Beside these checkboxes are situated fields Date and
Time.
2) Other fields excepts checkbox Interval negation define repeat gauge for each part of definition.
Interval is in specific time valid, when:
a) holiday isn't checked or chosen time point represents some of defined holidays;
b) no day of the week is checked or chosen time point represents checked day in the week and
simultaneously;
c) no day is checked or chosen time point represents day of the specified day range;
d) no month is checked or chosen time point represents month of the specified day range;
e) no time is checked or chosen time point represents time of the specified time range;
3) If checkbox Interval negation is checked, rule 2) is negate. Limits described in the point 1)
aren't changed.
In the following part are specified gauges for used parameters:
a) If they are defined, then fields From and To have to contain valid days and times. If you set both
parameters ("from" and "to"), then value of the parameter From can't be greater than value from
the parameter To;