Routing objects 7.2 – 2N PBX 2N NetStar - Configuration Manual v2.6.0 User Manual
Page 75

Routing objects
7.2
75
Figure 1 View of configuration menu of routing object Bundle – tab Basic.
This menu consists of many parameters with following meaning:
Allocate strategy – This parameter sets way of object choosing within the selected bundle. You can
choose between strategy Linear or Cyclic.
Linear strategy – Incoming call is always routed to the first row of the bundle. If this object
is busy or unavailable, call is routed to the next row or terminated (according to another
setting).
Cyclic strategy – Incoming call is routed to the bundle row, which comes immediately after
that one, which was used by previous routing to this bundle. If this object is busy or
unavailable, call is routed to the next row or terminated (according to another setting).
Next target busy – With this option you can route incoming call to another row in the case of
routing to the busy one. So you can increase probability of successful routing.
Next call reject – With this option you can route incoming call to another row if it is rejected by
called user.
Access number – To this field you can set bundle number, which is used for bundle identification
within the services Bundle login and Bundle logout.
Route to next line at no answer – With this option you can activate function for routing to another
row of the bundle after expiration of timeout set via parameter No answer timeout [s]. To another
row is incoming call routed only if it isn't accepted.
Leave last ringing – If this option is checked and routing to another row at no answer is used, the