2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 57)

Services 6.5
57
If you want to use some service, you have to dial specific prefix, which is routed to the routing table
according to called number. Default router for services is situated in the menu Routing - Routers
and is called Services:
Figure 1 View of part of router Services, which is used for routing calls to services.
Another possibility how to activate or deactivate some service is activation via messages. This
method can be used only for group of services, which doesn't need call in active state for service
settings (e.g. all call forwardings, PIN changing, Profile activation, ...).
Description of some services
Some services need more than only progress tones or messages settings. In this menu you can find
explanation of some parameters that aren't common.
a) Private call
By this service you have to set up destination in the field Destination. You can choose between
possibilities "Nothing" (uses setting from calling user) and "Router" (you have to set specific router).
This destination is then used for call routing within this service.
b) Park
By this service you have to set up parameter Maximal time of parking. Default value is set to 180s.
Parked user hears Music on Hold. After expiration of set timeout is parking place relieved and call
begins to alert at that station, which parked it before. Parked user hears in this time alert tone.