2N PBX 2N NetStar - Configuration Manual v2.6.0 - Manual (Page 42)

Virtual port options 3.7
42
Stack
The tab Stack is described in the chapter 3 Virtual ports, because it depends on stack type.
Messages
The tab Messages is used only on the virtual port types, GSM and SIP virtual ports, because on the
others it has no sense. This tab consists of following parameters:
Repeat at fail – With this parameter you can enable or disable repeated attempts for transmitting
received SMS messages.
Destination:
Type – This parameter sets type of the routing object, where are received SMS message transmitted.
Id – It sets specific object of above selected type.
Default user – Here you can set specific user, who will receive all incoming SMS messages, which
can not be routed to destination specified in the field Destination.