Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 81)

Select one of the following: 2.
Create New − Select Create New to enter a new name.
♦
Any other entry − Any other entries on the list are recent fields.
♦
Repeat Steps 1 and 2 for the Farm, Field, and Event. 3.
Press until you select Next Screen and then press . 4.
If the field does not already exist, it is now named.
If the field already exists, the system displays a warning message. Go back and rename the field.
Entering a new field name
Press to select Create New and then press . The Create New screen appears: 1.
Move the cursor to the appropriate letters and then press . 2.
Select and then press to accept the name and return to the previous screen. The new name
appears in the option that you selected.
3.
System Configuration Files
Once you configure the system, you can save and load those configuration settings. Saved system configurations
can be useful if you want to:
move the lightbar from one vehicle to another
•
drive in the same vehicle but with different settings (for example, with a different implement)
•
try adjusting the settings to improve performance
•
77