Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 44)

Step 4: Naming the field
When you create a new field in Advanced mode, the first Confirm Configuration screen displays the field name
information. By default, the Client and Farm options show whatever you entered last time:
To rename the field:
Press to select the Client option and then press . The Client screen appears. 1.
Select one of the following: 2.
Create New − to enter a new name
♦
Any other entry − to use an exisitng name
♦
Repeat Steps 1 and 2 for the Farm, Field, and Event. 3.
Select Next Screen and then press . 4.
Note: If the Client, Farm, and Field names already exist, the system displays the message: You must
rename the field with a new name.
Step 5: Entering record keeping information
Note: This feature is available in the firmware version 3.00 and later.
The Record Keeping screen appears:
40