Getting guidance – Ag Leader EZ-Guide 500 Getting Started Guide User Manual

Page 37

To snap guidance to the straight line at the top
of the screen, press the next AB icon again.

Using FreeForm curves in spiral fields (round and round)

If you are creating a spiral into the center of the field, drive the full circuit and then back onto the start of the
FreeForm curve. Continue to record your guidance path as you spiral toward the center of the field.

If you encounter an obstacle in the field, continue to record your path as you drive around it and on the next pass
the guidance line will adjust to reflect this.

Note: When you create a spiral with the FreeForm guidance pattern, there may be a space at the center of the
spiral.

Using FreeForm curves in fields with variable terrain

Start and stop recording guidance at the ends of each pass. If there are 2 guidance lines in close proximity, use the
Next AB icon

to snap to the correct line.

At any point, you can add a straight AB Line for repeated straight line guidance. Use the

icon to switch

between straight AB and FreeForm curve guidance lines.

Getting Guidance

The

icon enables you to create a guidance line and begin driving in the field.

Depending on which pattern you select, follow these steps:

Enter the vehicle information.

Select a pattern.