Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 39)

On the A+ Heading screen, press or until the screen displays the required heading. 1.
Note: The default heading is the heading of the previous AB Line.
Press . The main guidance screen appears. 2.
Defining the number of headland circuits
When you create a headland, you need to specify the number of circuits.
This is the number of headland circuits that will be generated after you have driven the first headland
circuit.
On the Headlands Circuits screen, press or until the screen displays the required number
of circuits.
1.
Press . The main guidance screen appears. 2.
Step 4. Defining the pattern on the field
Drive to the start point. 1.
Note: For a headland, set the start point and begin to drive.
Set the A point. 2.
Drive the guidance line. 3.
Note: To accurately define a pivot, put the vehicle wheel in a center pivot near the outside edge of the
field.
35