Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 51)

Press or until you set the appropriate number of circuits. 1.
Press . The main guidance screen appears with the headland loaded. 2.
Selecting (Loading) a Field
Note: You do not have to actively save a field. Fields are stored automatically.
To load a field, do the following:
Select the field to load. 1.
Select or create the event. 2.
Select the line to load. 3.
Set up the implement (if necessary). 4.
These steps are described below.
Step 1. Selecting the field to load
There are two ways you can select a field to load:
Using FieldFinder
•
Selecting the Field name from a list
•
Using FieldFinder
The FieldFinder option allows you to choose a field from a map view.
Note: The vehicle must be within 200 m of the field for it to appear on screen.
To use FieldFinder:
From the Create new field or select old field screen, select Use FieldFinder . 1.
47