Ag Leader EZ-Guide 500 Getting Started Guide User Manual

Page 58

Note: The maximum Nudge Increment value is 30 cm (12").

To reset the nudge distance to 0, select Configuration / System / Guidance / Reset Nudge.

Viewing the current amount of nudge

There are two ways to view the current amount of nudge that has been applied:

The nudge value is displayed on the Tip/Message bar at the bottom of the screen while a nudge icon is
highlighted

•

The first information tab shows the current nudge value. Press the

function button.

•

Resetting nudge after each row

You can configure the lightbar to reset the nudged position each time you change rows:

Select Configuration / System / Guidance / Clear Nudge at Swath End.

Select On and then press

Each time you move from one swath to the next, the nudge value will reset to 0, and the swaths will return to their
original position.

The shift icon

Shift moves the guidance line directly to the vehicle position.

Shift enables you to permanently update the position of the line. With the shift and save mode, you can move the