Ag Leader EZ-Guide 500 Getting Started Guide - Manual (Page 69)

Select Next Screen and then press . 2.
RTK corrections are configured.
TrimbleRadio protocol
Set the Radio Network Number to match the network ID number of the base station. If the network IDs
do not match, the radios will not communicate. 1.
Select Next Screen and then press . 2.
RTK corrections are configured.
Configuring the GPS Limits
The GPS Limits screen enables you to adjust several of the GPS signal strength tolerances. If you are having
trouble getting GPS reception, you may be able to receive a signal by lowering the tolerances, but at the cost of
lowering signal quality and therefore lowering GPS accuracy.
To adjust the settings, select Configuration / System / GPS / GPS Limits.
Select the appropriate setting and then press . The limit adjustment screen appears. 1.
65