HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class - Manual (Page 15)

Fabric OS 5.0.0 Advanced Web Tools user guide 15
With the following:
For all other switch types (HP StorageWorks SAN Switch 2/8V, SAN Switch 2/16V, SAN Switch
2/32, SAN Switch 4/32, and Brocade 4Gb SAN Switch for HP p-Class BladeSystem), the Switch
Information View is located below the graphic representation of the switch.
• On page 32, after the section “Displaying switches in the fabric,” add the following section:
Ending the Web Tools session
You can end your Web Tools session by either logging out or closing the Switch Explorer browser
window.
A session automatically times out if it has been inactive for longer than 10 minutes. If the session times
out, you must restart your browser, access Web Tools, and log in again.
To end the Web Tools session
Click Logout in the Switch Explorer.
or
Click the X in the upper right corner of the Switch Explorer browser window to close the window.
• On page 32, in the section “Opening modules in a secure fabric,” add the following:
Replace the following sentences:
When opening modules in a secure fabric, log in to one module at a time and complete the entire
login process before proceeding to another task. For example, if you want to access both the Zone
Admin and the Switch Admin modules, open one of the modules, log in, and wait for it to load
completely before opening the second module.
With the following:
When opening modules in a secure fabric, wait for each module to load completely before
proceeding to any other task. For example, if you want to access both the Zone Admin and the
Switch Admin modules, open one of the modules and wait for it to load completely before opening
the second module.
• On page 39, in the section “Switch support,” replace the first sentence:
You can use Web Tools 4.x with the following hardware: