HP HSG Array Controller - Manual (Page 96)

5-16 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: f-ch5 Managing the Switch over the Web Last Saved On: 4/7/99 12:36 PM
Port Detail View Page
The Port Detail View Page, Figure 5-6, provides statistics for each port. The
page features 16 cascaded folders (tabs) one for each port. Each folder has a
tab on the top to show the port number and a status light to tell the port state.
The port information is updated once per second. However, the time interval
maybe as long as 2.5 seconds depending on the browser used. By glancing at
those 16 or 8 tabs, a system administrator will gain the knowledge of each port
state. The default top folder displayed on this page is for the port number
checked from the General Switch View Page. Clicking on a tab brings the
corresponding port folder to the front.
NOTE: This page shows an FL_Port as being offline if you are running cross port
connected testing, the reason is that you can have only one Principle per Switch. The
FL_Port to FL_Port testing still proceeds even though this is NOT the correct way to
connect FL_Ports.
Below the folders is a push button linked to the Administrative Interface Page
where port enable/ disable can be performed. A push button linked to the
Performance View Page where port and Switch throughput data is plotted. A
Done push button is used to exit from the page.
Each port folder contains general port status information such as the port
number, port type (E-Port, G-Port), port's WWN name and some detailed
information, such as the number of interrupts, number of link failures, number
of parity errors, number of time outs and the size of free buffer.
The LED located in the upper right corner in each tab resembles the port LED
in the Switch front panel.
Port Detail View Page field are described in Table 5-4.