HP HSG Array Controller - Manual (Page 144)

B-4 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Table B-1
agtcfgShow Field Command Descriptions
Field Description
sysDescr System description: the default value is set
as “
Fibre Channel Switch”
sysLocation The node’s physical location. The default
setting is “End User Premise”.
sysContact The identification and contact information
for this system. By default, this is set as
“
Field Support”.
authTrapsEnabled Trap authentication. Possible values
include 0 (OFF), 1 (ON)
SNMPv1 community and trap recipient
configuration
This example shows six communities
available with which to register and define
the recipients of SNMP traps. The recipient
is the host which has SNMP management
installed. Values include read and write (rw)
and read only (ro).