HP HSG Array Controller User Manual

Page 153

Telnet Commands B-13

Compaq Confidential – Need to Know Required

Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:

Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM

and hold it down and select RUN.

Let go of the left mouse button and type in Telnet.

Select Connect and a menu will open.

Select Remote System. A text box will show up.

In the box labled Host Name: Type in XXX.XXX.XXX.XXX

where XXX.XXX.XXX.XXX is the IP address of the Compaq StorageWorks
Fibre Channel Switch that you want to download.

Connect to the Switch and login as:

admin

password:

password

10.

Then type:

flashDownload "192.168.60.200",

"administrator","V1.6b"

The 192.168.60.200 above must be replaced with the IP address of your host
computer (PC). You may have to change the V1.6b to whatever the current
Firmware file is called. If you are logged into an NT system under an account
other than administrator you will have to modify "administrator" to the
account you are using to run Rshd.exe which must also be run from the
directory that contains cat.

The output will look something like:

1330320+203572+427356

writing flash 0 .............................

writing flash 1 .............................

download complete

value = 0 = 0x0

switch:admin>

11.

You can then click on the RSHD window and type Control C or select
File and Exit to stop Rshd from running.

12.

Select the Telnet window and type reboot to cause the Switch to reboot
and copy the flash into the ram and come up running the latest Compaq
StorageWorks Switch Firmware.