HP HSG Array Controller - Manual (Page 20)

Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments: V1.6 OEM Source
Part Number: AA-RHBYA-TE 135267-001 File Name: c-ch2 Installing the Switch Last Saved On: 4/7/99 1:45 PM
Chapter
2
Installing the Switch
Installation Summary
To install the Switch you have to perform the following steps:
■ Unpack the shipping container
■ Select an operating location
■ Select a Switch mounting method
■ Install the Gigabit Interface Converter (GBIC) modules (ordered
separately)
■ Connect cables to the Switch
■ Turn on the power to the Switch
■ Enter the IP address.
Package Contents
Make sure the following items are included in the shipment:
■ A 16-port Fibre Channel Switch (380578-B21) or an 8-port Fibre
Channel Switch (380591-B21)
■ Two ac power cords: one for rack mounting the Switch; one for table
top use
■ Interface cards (already installed in the Switch)