HP HSG Array Controller - Manual (Page 227)

Telnet Commands B-87
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Table B-19
LSDbShow Command Field Descriptions
continued
Field Description
lsId The record’s Link State ID, equal to the Switch’s
domain ID as described by the record.
advertiser Switch ID of the Switch that issued this LSR.
Currently set to
lsId .
incarn The incarnation number. When a record is
refreshed, every 10 minutes, its incarnation
number is incremented by 1. If data in the record
changes (for example, if an E_Port on a Switch
goes offline), the Switch described by that record
issues a new instance, and increments the
incarnation number by 1.
length The total record length.
chksum The record checksum. It includes all fields except
lsAge .
linkCnt The link count, is the number of neighbors in
NB_ST_FULL state that are adjacent to the Switch
described by this record. The linkCnt field is
followed by a number of lines equal to the link
count. Each line contains the following information:
linkID is the neighbor Switch’s domain ID.
out port is the ISL port number connecting the
neighbor Switch.
cost is the cost of sending a frame over the ISL
connected to this port. It is the same value as the
cost in the neighbor data structure of the Switch
described by this record.
linkID The neighbor Switch’s domain ID.
rem port The port on the remote Switch that the local port
(out port) is connected to
costCnt Always 0
type Always 1