Topologyshow – HP HSG Array Controller User Manual
Page 232
B-92 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
topologyShow
Figure 5-61 and Figure 5-62 shows the
topologyShow
command which
displays all paths to a domain including:
■
Output port(s) used to route frames to the domain
■
The routing cost to reach the domain
■
The input ports routed through the output port
The FSPF protocol supports equal cost multipaths, so there could be multiple
'parallel' paths between two Switches.
The command syntax is
topologyShow
to list all domains.
admin> topologyShow
Local Domain ID: 1
Domain Metric Hops Out Port In Ports Flags Name
-----------------------------------------------------------------
1 2000 2 2 0x00000050 D "open348"
2 1 0x00000020 D
2 0 0x00000080 D
Type
4 3000 3 2 0x00000050 D "open375"
3 1 0x00000020 D
3 0 0x00000080 D
Type
value = 1 = 0x1
Figure B-60. topologyShow Command Example 1