HP HSG Array Controller - Manual (Page 69)

Managing the Switch 3-35
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Tools for Managing with SNMP
Compaq’s StorageWorks Command Console (SWCC) software is the easiest
tool to set up for managing the Storage Switch. The SNMP MIBs are
integrated into the SWCC software. Refer to SWCC documentation included
with the Storage Switch CD. Information is provided for Compaq CNMS and
HP OpenView for those sites that want to control the Switch using tools other
than SWCC.
Trap definitions may be setup with a number of tools including StorageWorks
Command Console (SWCC), HP OpenView, and others.
Compaq CNMS SNMP Setup
Complete the following steps to incorporate the FC standard MIB and the
Compaq specific MIB into an SNMP Management station:
1. Install Compaq-CNMS on your PC.
2. Login to your PC
3. Double-click on the Compaq-CNMS icon on the desktop
4. When the User settings Wizard will pops up:
Y Choose normal and click Next.
Y Choose default polling option, and click Next.
Y Change the default “write” Community string to “private”, and click
Next.
Y Leave the email choices at their default values, and click Next.
Y Leave the web choices at their default values, and click Next.
Y Leave the wizards choices at their default values, and click Next.
Y Choose YES for “manageable devices automatically discovered” and
click Next.
Y Type in the gateway Router IP address (provided by your network
manager).
Y Leave the “other community strings for read” at their default values,
and click Next.
Y Leave the automatic layout settings at their default values, and click
Next.
Y At the next window click on “begin discovery now.” This completes
the User settings wizard entries.