HP HSG Array Controller - Manual (Page 185)

Telnet Commands B-45
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
portPerfShow
Figure B-28 shows the portPerfShow command which displays the
throughput for all ports. The output is terminated by typing Return or Ctrl-C.
The throughput number represents the number of bytes received plus the
number of bytes transmitted and is displayed as bytes/second (B/s).
Throughput numbers are shown either as bytes/second, kilobytes/second (the
number is followed by 'k') of megabytes/second (the number is followed by
'm'). This information is used to monitor port performance. One line is printed
per second summarizing the traffic on all ports.
admin> portPerfShow
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
value = 2 = 0x2
Figure B-28. portPerfShow Command Example