HP HSG Array Controller - Manual (Page 46)

3-12 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
4. Use and to increment or decrement the displayed value.
The underlined cursor indicates the numbers to modify.
5. After entering a number, press to move the cursor to modify
the next field.
6. After setting the Fibre Channel’s IP address, pressing stores the
value.
Fibre Channel Subnetmask
Pressing , while Fibre Channel Subnetmask is selected,
displays:
Fibre Channel Subnetmask
none
The default subnetmask value is none, as shown in the example. Consult your
network administrator for the appropriate subnetmask.
Enter the Switch’s Fiber Channel Subnetmask by using and to
increment or decrement the displayed value.
Gateway Address
Pressing , while Gateway address is selected, displays:
Gateway Address
0. 0. 0. 0
The default gateway address is shown above. You must enter a valid gateway
address, if required.
To enter the gateway address:
1. Use and to increment or decrement the displayed value.
The underlined cursor indicates the numbers to modify.
2. After entering a number, press to move the cursor to modify
the next field.
3. After setting the gateway address, pressing stores the value.