Booted at, Firmware date, Flash date – HP HSG Array Controller User Manual
Page 56: Boot prom date
3-22 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Current Date:
Mon Oct 21 10:23:35 1997
Booted At
Pressing
Booted At
is selected, displays the Switch’s boot
time:
Boot AT:
Mon Dec 14 18:34:20 1998
Firmware Date
The date always reflects the firmware assembly date. The Firmware Date
reflects the date code of the current executing firmware on the CPU. Flash
Date reflects the firmware date in flash memory. These dates may not match if
the flash memory has been updated with new firmware but the Switch has not
yet been rebooted. When the Switch is rebooted the flash code becomes the
executing CPU code, both dates match.
Pressing
Firmware Date
is selected, displays the date of
the Switch’s firmware:
Firmware Date:
Nov 16 18:15:29 PST 1998
Flash Date
Pressing
Flash Date
is selected, displays:
Flash Date:
Nov 16 18:15:59 PST 1998
This display gives the date and time for the last flash firmware update. If you
upgrade the firmware in flash memory with a different firmware version, the
date the new firmware was entered is displayed.
Use this date to quickly
establish the date the firmware was updated.
Boot Prom Date
Pressing
Boot Prom Date
is selected, displays: