Test menu, Managing via telnet, Licenses – HP HSG Array Controller User Manual
Page 61
Managing the Switch 3-27
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Licenses
Selecting
Licenses
, then pressing
Licenses
000
Features requiring a license are:
Table 3-7
Licenses
Type
Description
000
None
001
Web Tools is installed.
002
Zoning is installed..
004
SES is installed.
Test Menu
The tests available from the Test Menu are part of the diagnostic and fault
isolation capabilities. These tests, and their use, are discussed in the Service
Guide.
Managing Via Telnet
To make a successful Telnet connection to a Switch, the user needs:
■
Switch name or IP address
■
Username
■
Password.
NOTE: The IP address must have been previously installed using the front panel controls.
Consult with the your network system administrator for the Switch’s assigned IP address
Only one Telnet session is allowed at a time.