HP HSG Array Controller - Manual (Page 182)

B-42 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Table B-9
portlogShow Command Field Descriptions
continued
Field
Description
Port
Either the port number of the affected port, or the last byte of a well-known
address (e.g. fc for the well- known Name Server address).
cmd
The cmd field represents different values depending on the task and event.
The following definitions are included:
For ioctl events, cmd is the I/O control command code. More explanations
are provided shortly.
For Tx and Rx events, cmd is the payload size.
For scn events, cmd is the new state.
For pstate events, the new physical state.
For ctin events, cmd consists of two 2-byte sub-fields. More explanations are
provided shortly.
For ctout events, cmd consists of two 2-byte sub-fields. More explanations
are provided shortly.
continued