HP HSG Array Controller - Manual (Page 178)

B-38 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
portEnable
Figure B-24 shows the portEnable command which is used to enable a
specific port. The first example shows a L-Port and the second an F-Port (as
displayed by the switchShow command). The command syntax is
portEnable .
admin> portEnable 2
value = 0 = 0x0
admin> portEnable 5
admin> fabric: reconfiguring
5 4 3 2 1
10 9 8 7 6 5 4 3 2
value = 0 = 0x0
Figure B-24. portEnable Command Example
portLogClear
Figure B-25 shows the portLogClear command which clears the data from
the port log. The command syntax is portLogClear .
admin> portLogClear
value = 2031619 = 0x1f0003
Figure B-25. portLogclear Command Example