HP HSG Array Controller - Manual (Page 26)

Installing the Switch 2-7
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments: V1.6 OEM Source
Part Number: AA-RHBYA-TE 135267-001 File Name: c-ch2 Installing the Switch Last Saved On: 4/7/99 1:45 PM
3. Connect an extender bracket to each mounting bracket using two SEMS
10-32x5/8 screws (Figure 2–4); just finger–tighten the screws.
SHR-1381
Figure 2-4. Connecting an Extender Bracket to a Mounting Bracket
4. Insert an alignment washer into each of the eight rail holes marked M
(Figure 2–5).
SHR-1382
Figure 2-5. Installing the Mounting Brackets in a RETMA 42U or Compaq
Classic Rack
5. Attach each mounting bracket to the rack rails by inserting SEMS
10-32x5/8 screws through the alignment washers into the bracket holes;
tighten all the screws.
6. Tighten the four screws that connect the extender brackets to the
mounting brackets.