HP HSG Array Controller - Manual (Page 235)

Telnet Commands B-95
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
uRouteShow
Figure B-63 shows the uRouteShow command which displays the port's
unicast routing information which is the output port used to forward frames
from a port to the domain. Only one output port is used to forward frames
from one input port to a destination domain.
The command uRouteShow now has three different syntax options:
■ uRouteShow – displays the route for
port to domain
■ uRouteShow – displays the route for port to all
the active domains in the Fabric
■ uRouteShow – displays the route for all the ports on the Switch to all
the active domains in the Fabric
In addition, in all three formats uRouteShow shows for each route, the domain
ID of the next hop and the port # on the next hop.
admin> uRouteShow
Local Domain ID: 1
In Port Domain Out Port Metric Hops Flags Next(Dom,Port)
--------------------------------------------------------------------
0 5 7 1000 1 D 5,6
6 7 2000 2 D 5,6
7 7 3000 3 D 5,6
8 7 4000 4 D 5,6
9 7 5000 5 D 5,6
1 5 5 1000 1 D 5,5
6 5 2000 2 D 5,5
7 5 3000 3 D 5,5
8 5 4000 4 D 5,5
9 5 5000 5 D 5,5
2 5 4 1000 1 D 5,4
6 4 2000 2 D 5,4
7 4 3000 3 D 5,4
8 4 4000 4 D 5,4
9 4 5000 5 D 5,4
value = 1 = 0x1
Figure B-62. uRouteShow Command Example