HP HSG Array Controller User Manual
Page 71
Managing the Switch 3-37
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
19.
Click OK on the next window, then choose “Browse MIB to parse”
from the next window.
20.
Choose the sw.mib. The MIB should compile successfully. Exit out of
the Parse MIB Window. Exit out of the MIB Browser window.
HP OpenView SNMP Setup
The following example explains how to integrate a Switch Enterprise MIB to
the SNMP database through HP OpenView in a Windows NT environment.
For specific SNMP site requirements, refer to your system administrator.
To integrate the Enterprise MIB into the SNMP database:
1.
Rename and place the copy of the femib.mib or swmib.mib definition
under the appropriate subdirectory under HP OpenView. The default is
C:\OV\MIBS.
2.
Start the OpenView manager and click “control” on the menu bar
followed by choosing the SNMP manager and Manage Database
3.
Click on Select and pick the C:\OV\MIBS\femib.mib or
c:\OV\MIBS\swmib.mib
4.
Click Compile button. You are now ready to create a submap, queries,
and perform SNMP operations on the Switch.