HP HSG Array Controller - Manual (Page 44)

3-10 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: d-ch3 Managing the Switch Last Saved On: 4/7/99 11:59 AM
Table 3-3
Front Panel and Telnet Commands
continued
Menu F RONT P ANEL T ELNET C OMMAND D EFAULT
Port Register
Test portRegTest N/A
Central Memory
Test centralMemoryTest N/A
RDRAM Test rdramTest N/A
Port Loopback
Test portLoopbackTest N/A
Cross Port Test crossPortTest N/A
Spin Silk Test spinSilk N/A
Display Test N/A N/A
Push Button Test N/A N/A
Configuration Menu
You configure the Switch using the Configuration Menu. Pressing
while in the
Configuration Menu selects the option to choose
commands:
IMPORTANT: After changing any IP address from the following menus from the front
panel or Telnet, you must reboot the Switch for the changes to take effect.
Ethernet IP Address
Pressing , while Ethernet IP address is selected, displays the
Switch’s Ethernet IP address:
Ethernet IP Address
10. 00. 00. 10
The Switch’s default IP address, as shown, is a temporary address derived
from the Switch’s WWN. Enter a valid IP address.
NOTE: The IP address must have been previously installed using the front panel controls.
Consult with the your network system administrator for the Switch’s assigned IP address.
Only one Telnet session is allowed at a time.