HP HSG Array Controller - Manual (Page 32)

Installing the Switch 2-13
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments: V1.6 OEM Source
Part Number: AA-RHBYA-TE 135267-001 File Name: c-ch2 Installing the Switch Last Saved On: 4/7/99 1:45 PM
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
2
3
4
5
6
7
SHR-1309
Figure 2-12. Switch Cable Connections
Connecting an Ethernet Network to the Switch
Connect an Ethernet 10BaseT network to the Switch by plugging in the
Ethernet cable at the RJ-45 connector
Š.
Connecting the Power Cable to the Switch
Connect the ac power cable to the Switch ac connector
ˆ.
Turn on the Power to the Switch
Turn on the ac power switch
‡. The Switch runs the power–on self test
(POST). The front panel display
† shows the tests performed in serial fashion:
■ Memory test
■ Port register test
■ Central memory test
■ Port loop-back test.
When each test completes successfully, the message “Passed” appears on the
display. When all the tests have been completed the display returns to the
normal dark condition, and the Port LEDs show a steady green light. Refer to
Table 2-2 for the meaning of the different LED states.