HP HSG Array Controller - Manual (Page 149)

Telnet Commands B-9
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
admin> errShow
Error 02
--------
0x103dc470 (tSilkworm): Apr 9 10:41:06
Error SENSOR-FAILED, 3, sensor 7 (Fan 2) is below
minimum
Type to continue, Q to stop:
Error 01
--------
0x103dc470 (tSilkworm): Apr 9 10:40:51
Error DIAG-TIMEOUT, 1,
Port 2 receive timeout.
Type to continue, Q to stop:
value = 1 = 0x1
Figure B-6. errShow Command Example
fabricShow
Figure B-7 shows the fabricShow command which displays a list of
Switches and multicast alias groups in a Fabric. The fields are described in
Table B-4.
admin> fabricShow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
-------------------------------------------------------------------------
0: fffc40 10:00:00:60:69:00:10:63 192.168.1.1 0.0.0.0 "sw1"
1: fffc41 10:00:00:60:69:00:0a:12 192.168.1.2 0.0.0.0 "sw2"
2: fffc42 10:00:00:60:69:00:01:b4 192.168.1.3 0.0.0.0 >"sw3"
value = 1 = 0x1
Figure B-7. fabricShow Command Example