HP HSG Array Controller - Manual (Page 162)

B-22 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
flashShow
Figure B-11 shows the flashShow command which displays the Switch’s
configuration status. The display shows remote host and flash configuration
information for flash-0 and flash-1 (a mirrored image of flash-0 and included
as a fail safe device).
admin> flashShow
Ethernet address: 0:60:69:0:4:64
Nvram data: ei(0,0)host:/usr/switch/firmware
e=192.168.64.146:ffffff00 g=192.168
.64.1 u=user tn=open146
Config fl-0 fl-1
------ ---- ----
version 0002 0002
flags 0000 0000
domain 0001 0001
syslogd_ip 0.0.0.0 0.0.0.0
fc_ip_addr 0.0.0.0 0.0.0.0
fc_ip_mask 0.0.0.0 0.0.0.0
bb_credit 0010 0010
df_size 0840 0840
r_a_tov 2710 2710
e_d_tov 07d0 07d0
op_mode 0000 0000
vc_link_ctl 0000 0000
vc_class2 0002 0002
vc_class3 0003 0003
vc_multicast 0007 0007
vc_priorities 0,1,2,2,2,2,3,3
0,1,2,2,2,2,3,3
vc_pid_map 767625432 767625432
frm collection piling piling
alt bb_credit 0000 0000
open bb_credit 0004 0004
send FAN frames yes yes
ql_ports n/c n/c
ql_peer n/c n/c
csum 4cc2 OK 4cc2 OK
Figure B-11. flashShow Command Example