HP HSG Array Controller - Manual (Page 79)

4-2 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: e-ch4 StorageWorks Command Console Software Last Saved On: 4/7/99 12:36 PM
If you choose to install and use the Fibre Channel Switch software, detailed
instructions on how to install, configure and use SWCC are provided in:
■ Getting Started with SWCC for the Fibre Channel Switch Guide, xx-
AA-RHDAA-TE (included in the Fibre Channel Switch software kit)
■ Command Console V2.1 (HSG80) for RAID Array 8000/ESA12000
User’s Guide AA-RFR2C-TE, 387405-003 (inluded with your Storage
Subsystem Platform Kit)
■ RA8000/ESA12000 HSG Solution Software V8.4 Installation Reference
Guide (included in your storage subsystem kit)
■ The text files readme, ccclient and fcswitch located in the CD packaged
with the Switch software kit.
StorageWorks Command Console Fibre
Channel Switch Applet Requirements
■ An Internet browser installed and operating on your computer.
■ You need a TCP/IP compatible network to communicate between your
Windows platform and the Switch. Two software components are
required to communicate over the network: a Client and its companion
Agent. The Client runs on a Windows NT, Windows 95 or a Windows
98 platforms, the Agent runs only on a Windows NT platform.
Installation Summary
1. Install Command Console Client, version 2.1 for the HSG80 Storage
Subsystem, and install the Fibre Channel Switch Client. Installation
instructions and the path to the Client’s setup.exe file are provided in
Chapter 4 of the Getting Started with SWCC Guide included with your
Switch Software Kit.
2. Install the Fibre Channel Switch Agent. Refer to Chapter 6 of the
Getting Started with SWCC Guide for instructions and the path to the
setup.exe file.
3. Configure the Fibre Channel Switch Agent. Refer to Chapter 7 of the
Getting Started with SWCC Guide.