HP HSG Array Controller - Manual (Page 197)

Telnet Commands B-57
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Table B-12
switchShow Command Field Descriptions
Field Description
switchName The Switch name.
switchRole There are three possibilities for switchRole including:
Master: the principal Switch, as defined in FC-SW
Slave: this switch is enabled and not the principal Switch
Disabled: the Switch is disabled.
switchDomain The domain ID of this Switch: 0 to 31. The lowest domain
numbered Switch in a Fabric will become the master.
switchID The domain ID of this Switch's embedded port: hex fffc00 to
fffc7f.
switchWwn The World Wide Name of this Switch. The WWN is a unique
identifier for each Switch and is assigned by the manufacturer.
A numbering scheme administrated globally assures that this
WWN is unique to each Switch.
switchState The state of this Switch: Online, Offline, Testing or Faulty.
Port Number One line per port is printed after the Switch summary. Each line
shows the port number: 0 to 15, the GBIC type, the port state
and a comment field.
continued