Front panel features, Table 1-1 option kits, Figure 1-1 – HP HSG Array Controller User Manual
Page 18
1-2 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: b-ch1 Introduction Last Saved On: 4/7/99 12:36 PM
Table 1-1
Option Kits
Model
Part Number
8-port Fibre Channel Switch, rack mount kit, software/doc.
kit, no GBICs
DS-DSGGA-AA
380591-B21
16-port Fibre Channel Switch, rack mount kit,
software/doc. kit, no GBICs
DS-DSGGA-AB
380578-B21
The Switch supports up to 16 fibre channel ports and consists of a
motherboard, processor board, connectors for supporting up to 8 dual-port
interface cards, and software for building and managing a Fibre Channel
Fabric. The primary function of a Fabric is to receive frames from a source
N_Port (host bus fibre channel adapter or fibre channel storage) and route the
frames to the destination N_Port whose address identifier is specified in the
frame.
Front Panel Features
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
6
1
2
3
4
5
SHR-1206
Figure 1-1.
1
Fibre Channel Port: Connects the Switch to the Fabric.
2
RJ45 Ethernet Connector: Connects the Switch to the network for out-of-
band management of the Switch.