HP HSG Array Controller - Manual (Page 17)

Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: b-ch1 Introduction Last Saved On: 4/7/99 12:36 PM
Chapter
1
Introduction
Option Kits
The StorageWorks Fibre Channel Storage Switch is a key component of the
Enterprise Network Storage Area (ENSA) implementation. The Switch is used
to connect network servers with storage devices, such as Compaq’s
RA8000/ESA12000 HSG80 RAID Array Storage Subsystems, to create a
Storage Area Network (SAN). There are two Switch Option Kits (Models), an
8-port model and a 16-port model. The 8-port model contains four dual-port
interface cards; the 16-port model has eight interfaced card installed on the
motherboard.
NOTE: Note: Zoning, Cascading, FL_ports, SES, and Copper Media are not fully
supported by Compaq as of April 1999. However, the software bundle that
enables these features is included in the software package with this Switch and
is provided at no additional cost so that customers may have the opportunity to
become familiar with these advanced SAN functions. Compaq will support many
of these and other SAN functions in the future. Contact your Compaq Authorized
Reseller or Compaq Account Representative for specific information on these
features.