HP HSG Array Controller - Manual (Page 157)

Telnet Commands B-17
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Table B-5
flashSet Command Field Descriptions
Field Description
domain_id The domain number uniquely identifies the Switch in a Fabric. Normally, this Switch
ID is automatically assigned by the Switch and may be any value between 0 and 31.
b_to_b
credit
The number represents the number of buffers, in a range from 1 to 16, available to
the host. For a complete description of this function, the buffer-to-buffer credit,
refer to the industry specification
Fibre Channel Physical and Signalling Interface
(FC-PH).
r_a_tov Resource Allocation Time Out Value (R_A_TOV) is displayed in milliseconds. This
variable works with the variable E_D_TOV to determine the Switch’s actions when
presented with an error condition. Allocated circuit resources with detected errors
are not released until the time value has expired. If the condition is resolved prior to
the timing out, the internal time out clock resets and waits for the next error
condition.
The range is 4000 to 120000 milliseconds.
The set value must be larger than the set value for the Error Detect Time Out Value.
continued