HP HSG Array Controller - Manual (Page 176)

B-36 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
Examples
The following is a list of possible examples:
1. Invalid user name.
admin> passwd "nobody"
passwd: nobody is not a valid user name.
2. Invalid command usage.
admin> passwd ""
Usage: passwd [username]
3. Permission denied.
admin> passwd "root"
passwd: Permission denied.
4. Just change the user name.
admin> passwd "admin"
New username [admin]: maint
Old password:
passwd: Password unchanged.
Updating flash...done.
5. Change the user name and password.
maint> passwd "maint"
New username [maint]: admin
Old password:
New password:
Re-enter new password:
Updating flash...done.
6. Skip through the prompts w/o changes.
admin> passwd
New username [admin]:
Old password:
passwd: Password unchanged.
New username [user]:
Old password:
passwd: Password unchanged.
New username [other]:
Old password:
passwd: Password unchanged.
7. Surpass failure limit, then cancel the command.