Flashset – HP HSG Array Controller User Manual
Page 156
B-16 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
6.
Instruct the Switch to reboot on the new firmware image
flashSet
Figure B-10 shows the
flashSet
command which is used to set the Switch’s
configuration parameters. This command may not be executed on an
operational Switch. You must first disable the Switch using the
switchDisable
command.
Values may be changed by typing the new value after the prompt or left unchanged
by pressing the Return. The fields are described in Table B-5.
admin> flashSet
changing flash configuration
domain_id [1]:
b_to_b credit [16]:
r_a_tov [10000]:
e_d_tov [2000]:
op_mode [16]:
vc_link_ctl [0]:
vc_class2 [2]:
vc_class3 [3]:
vc_multicast [7]:
vc_priority 2 [2]:
vc_priority 3 [2]:
vc_priority 4 [2]:
vc_priority 5 [2]:
vc_priority 6 [3]:
vc_priority 7 [3]:
collection method: (0)piling, (1)bundling
[0]:
alternate bb_credit [0]:
open/opened bb_credit [4]:
send FAN frames: (0)yes, (1)no [0]:
no changes
value = 0 = 0x0
Figure B-10. flashSet Command Example