HP HSG Array Controller - Manual (Page 174)

B-34 StorageWorks Fibre Channel Storage Switch User's Guide
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
nsAllShow
Table B-20 shows the nsAllShow command which displays a list of PIDs of
nodes connected to the Fabric. The nsAllShow command optionally takes an
integer parameter, the value of the FC-PH type. For example, nsAllShow 8
shows all SCSI- FCP nodes. If the parameter is not provided, then Nx_Ports
are displayed.
admin> nsAllShow
2 Nx_Ports in the Fabric {
614001 614301
}
value = 0 = 0x0
admin> nsAllShow 8
2 FCP Ports {
6042ef 6045e8
}
value = 0 = 0x0
Figure B-20. nsAllShow Command Example
nsShow
Figure B-21 shows the nsShow command which displays the local name
server information. If there is no local information, a message stating that is
displayed. Only local entries are displayed.
admin> nsShow
The Local Name Server has 2 entries {
Type Pid CO PortName NodeName TTL(sec)
NL 614001; 3;00:00:00:00:00:00:00:00;00:00:00:00:00:00:00:00; na
NL 614301; 3;00:00:00:00:00:00:00:00;00:00:00:00:00:00:00:00; na
}
value = 0 = 0x0
Figure B-21. nsShow Command Example