HP HSG Array Controller - Manual (Page 211)

Telnet Commands B-71
Compaq Confidential – Need to Know Required
Writer: Bill Reitz Project: StorageWorks Fibre Channel Storage Switch User's Guide Comments:
Part Number: AA-RHBYA-TE 135267-001 File Name: i-appb Telnet Commands Last Saved On: 4/7/99 12:36 PM
spinSilk nMillions where nMillions is the number of frames for
the test to execute expressed as millions of frames. If you do not include the
nMillions parameter, the spinSilk test runs until is pressed.
admin> spinSilk 5
Running Spin Silk .............
One moment please ...
Transmitting ... done.
Spinning ...
port 0 Rx/Tx 1 of 5 million frames.
port 1 Rx/Tx 1 of 5 million frames.
port 0 Rx/Tx 2 of 5 million frames.
port 1 Rx/Tx 2 of 5 million frames.
port 0 Rx/Tx 3 of 5 million frames.
port 1 Rx/Tx 3 of 5 million frames.
port 0 Rx/Tx 4 of 5 million frames.
port 1 Rx/Tx 4 of 5 million frames.
port 0 Rx/Tx 5 of 5 million frames.
port 1 Rx/Tx 5 of 5 million frames.
Diagnostics Status: Thu Jul 30 14:43:36 1998
port#: 0 1 16
diags: OK OK OK
state: UP UP UP
st0: 5022504 frTx 5003329 frRx 0 LLI_errs
st1: 5003616 frTx 5022790 frRx 0 LLI_errs
st16: 0 frTx 0 frRx 0 LLI_errs.
Central Memory OK
Total Diag Frames Tx: 48
Total Diag Frames Rx: 0
value = 0 = 0x0
Figure B-48. spinSilk Command Example 2